Filter
Top Products
ASSEMBL
Y19
A. Lower Hexagonal Area for Tightening
B. Upper Hexagonal Area (Adapter)
C. Stay
D. Non-permanent Locking Agent applied.
•
Turn the stay to assure visibility to the rear
with the operator sitting on the motorcycle.
•
Adjust the rear view mirror by slightly moving
only the mirror portion of the assembly.
A. Stay
B. Mirror
•
Installation and adjustment of the right side
mirror is common with the left side. Follow
the procedure specified for the left side.
Windshield
CAUTION
Be sure not to damage the surface of the
windshield when installing or handling.
A. Windshield Assembly
•
Remove the dummy bolts on the fork cover
and discard them.
A. Fork Cover
B. Dummy Bolts (Right Side)
•
Install the left and right mounting brackets on
the fork cover with the socket bolts (D = 8, L
= 20)(D = 8, L = 25).
A. Mounting Bracket (Right)
B. Socket Bolt (D = 8, L = 20)
C. Socket Bolt (D = 8, L = 25)
•
Install the windshield assembly on the mount-
ing brackets with the socket bolts (D = 8, L =
10)(4).
•
Set the windshield all the way down and
tighten the bolts securely.