Filter
Top Products
ASSEMBL
Y11
A. Left Switch Lead
B. Clutch Hose
C. Fasten the left switch lead and the clutch hose with two plastic clamps.
D. Fasten the right switch lead with the plastic clamp.
E. Fasten the right switch lead and the brake hose with the plastic clamp.
F.
Throttle Cables
G. Brake Hose
H. Right Switch Lead
I.
Handlebar
Front Fender
Front Reflectors (for US and CN Models
only)
•
Assemble the front left and right reflectors and
the brake hose clamps with the nut (D = 5) on
each.
A. Front Brake Hose Clamp (Left)
B. Front Brake Hose Clamp (Right)
C. Front Reflectors
D. Nuts