Filter
Top Products
80
CDIScale Settings
The course deviation indicator (CDI) definition field lets you select the +/- range
of the CDI bar scale on the Highway Page. Three scales are available: +/- 0.25
(default), 1.25, and 5.0 miles or kilometers. Note: This CDI value represents the full
deflection of scale to either side.
To enter a CDI scale setting:
1. Highlight the ‘cdiscale’ field (Fig. 80a), and press ENTER.
2. Select the desired setting, and press ENTER.
Units of Measure
The GPS II
+
lets you select statute (default), nautical, or metric units of measure
for all ‘speed’ and ‘distance’ fields.
To change the unit of measure:
1. Highlight the ‘units’ field (Fig. 80b), and press ENTER.
2. Select the desired unit of measure, and press ENTER.
Fig. 80a
Fig 80b
gps ii + Mon (final?) 2/9/98 4:25 PM Page 80