Filter
Top Products
65
To select a waypoint display option:
1. Highlight the symbol field (to the right of the name field), and press ENTER.
2. Move the cursor to the ‘display’ field (Fig. 65a), and press ENTER.
3. Select a display option, and press ENTER to select one of the following display options:
‘name with symbol,’ ‘symbol only,’ (Fig. 65b) or ‘comment with symbol.’
4. Press ENTER to confirm the ‘DONE?’ prompt.
5. Press ENTER again (on the waypoint definition page) to return to the Map Page.
The last function you can perform with a waypoint highlighted on the Map Page
is to perform a GOTO directly to the waypoint.
To GOTO a waypoint highlighted on the Map Page:
1. Press GOTO.
2. Press ENTER to confirm the GOTOwaypoint page.
Fig. 65a
Fig. 65b
gps ii + Mon (final?) 2/9/98 4:24 PM Page 65