Filter
Top Products
Fig. 19a
Fig. 19b
19
Clearing the Track Log
After you’ve practiced and used the GPSII
+
for a few trips, you may find that
your map display has become cluttered with track plots. To get a feel for how the
map and track features work, let’s clear the track log (the plot points left on the Map
Page) we’ve just created during the Getting Started tour.
To clear the track log:
1. Scroll to the Map Page, and press ENTER.
2. Highlight the ‘track setup’ field, and press ENTER.
3. Highlight the ‘clear log?’ field (Fig. 19a), and press ENTER.
4. Highlight ‘Yes?’, and press ENTER.
Congratulations! You’ve just completed the Getting Started Tour! You now know
enough about the GPS II
+
to go out and have some fun with it. We strongly recom-
mend that you read on and explore the Reference section, which contains a closer
look at all of the exciting features of the GPS II
+
.
To turn your GPS II
+
off:
1. Press and hold the red power key (Fig. 19b). The unit will count down for three seconds
and then turn off.
gps ii + Mon (final?) 2/9/98 4:24 PM Page 19