Filter
Top Products
40
Selecting a GOTO Destination
The GPS II
+
provides five ways to navigate to a destination: GOTO, MOB,
TracBack, route, and find city navigation (see pp. 71-72). The most basic method of
selecting a destination is the GOTO function, which lets you choose any stored way-
point as the destination and quickly sets a direct course from your present position.
To activate the GOTO function:
1. Press GOTO.
2. Select the waypoint you want to navigate to (Fig. 40a), and press ENTER.
Once a GOTOwaypoint has been activated, the Compass Page or Highway Page
will provide steering guidance to the destination until either the GOTO is cancelled
or the unit has resumed navigating the active route (see p 53).
To cancel an active GOTO:
1. Press the GOTO key.
2. Highlight ‘CANCELGOTO?’ (Fig. 40b), and press ENTER.
Fig. 40a
Fig. 40b
gps ii + Mon (final?) 2/9/98 4:24 PM Page 40