Filter
Top Products
Fig. 23a
Fig. 23b
23
Not Usable— the receiver is unusable, possibly due to incorrect initialization or
abnormal satellite conditions. Turn the unit off and back on to reset, and reini-
tialize the receiver if necessary.
Simulator— the receiver is in simulator mode (Fig. 23a).
EZinit Option Prompt
The Satellite Page also provides access to the EZinit prompt whenever a position
fix has not been calculated (Fig. 23b). (The unit must be in searching, AutoLocate,
acquiring, simulator, or poor coverage mode.) This allows you to reinitialize the unit
(see p. 7), and is useful if you have traveled over 500 miles with the receiver off and
must initialize your new position. (The EZinit prompt will automatically appear if the
receiver needs to be initialized. The prompt may also appear during normal use if
the antenna is shaded or the unit is indoors.)
gps ii + Mon (final?) 2/9/98 4:24 PM Page 23