Filter
Top Products
69
Track Setup Page
The track setup page lets you manage the GPS II
+
’s track log data. From this
page, you can select whether to record a track log and define how it is recorded.
To turn the track log on or off:
1. Highlight the ‘record’ field, and press ENTER.
2. Select ‘YES’ or ‘NO’, and press ENTER. (Note: Turning the track recording off will dis-
able the TracBack feature.)
Track Method
The stored track method determines how often positions are stored in the track
log. The default setting is automatic, which will store a track based on resolution.
This setting gives you the most efficient use of track memory and provides the most
accurate TracBack route.
To change the method to record points based on a specific time interval:
1. Highlight the ‘method’ field, and press ENTER.
2. Select ‘TIME INTERVAL’ (Fig. 69a), and press ENTER twice (Fig. 69b).
3. Enter a value in hours, minutes, and seconds, and press ENTER.
Fig. 69a
Fig. 69b
gps ii + Mon (final?) 2/9/98 4:24 PM Page 69