Filter
Top Products
The GPS 155XL’s satellite status page provides satellite information to monitor
GPS coverage and receiver performance. This is helpful when you may be experienc-
ing low signal levels due to poor coverage or installation problems.
To view the satellite status page:
1. Press
N
and rotate
O
until the satellite status page appears.
The top lines of the status page display a graphical CDI, followed by the receiver
status and the current position accuracy in DOP or EPE. The default setting is DOP.
The following functions may be displayed in the DOP/EPE field:
• dop— Dilution of Precision, a measure of the satellite geometry quality
and relative accuracy of your position, with 1 indicating good
geometry and 10 meaning poor.
• epe— Estimated Position Error, an overall measure of your positional
accuracy in feet or meters using signal and data quality, receiver
tracking status and DOP.
19
SECTION
1
Satellite status page with ‘EPE’ displayed.
Estimated Position Error (EPE) gives an overall
measure of your position accuracy in feet or
meters.
NAV KEY
Satellite
Status Page
Satellite status page with ‘DOP’ displayed.
Dilution of Precision (DOP) measures relative
accuracy from 1 to 10.
Receiver Status
Signal strength of
satellite being tracked (1-9)
CDI
Satellites in view
EPE/DOP
value
Satellite in view
but not receiving signal
155xlb manual 1/12/99 4:05 PM Page 19