Filter
Top Products
109
Restore data page
Data transfer page
APPENDIX
A
NAVDATA CARD
Saving User Data
To restore user data from a user data card to the GPS 155XL:
1. Install the user data card.
2. Rotate
O
to highlight ‘Restore user data?’.
3. Press
E
.
The GPS 155XL will ask you which type of data to replace. You may choose check-
lists, scheduler messages, user waypoints, proximity waypoints, routes, waypoint com-
ments, or all data.
4. Rotate
K
to select the type of data to replace.
You may either replace or update the information in the database. Replacing the
data will replace ALL user data with the data from the card. Updating the data will
not delete unrelated material, but will only change what is necessary to use the data
received from the user data card.
5. Rotate
O
to select either ‘Replace?’ or ‘Update?’.
6. Press
E
to begin transferring data to the GPS 155XL. The GPS 155XL will now transfer
all of the data requested. This may take a few minutes.
7. To continue with more data transfer types, repeat steps 4, 5 and 6. Otherwise, press
E
when ‘ok?’ is highlighted.
8. Turn the GPS 155XL off and replace the user data card with a NavData card. The GPS
155XL is now ready for normal operation.
155xlb manual 1/12/99 4:06 PM Page 109