Filter
Top Products
If the frequency is receive only, the frequency type will be followed by ‘
r
x’. If the
frequency is transmit only, it will be followed by ‘
t
x’. If the displayed frequency has
sector and/or altitude restrictions, they will also be displayed. Sector restrictions
define a range of radials from the applicable facility. Altitude restrictions may describe
an area above, below, or between altitudes. In some instances, narrative restrictions
that will not fit on the displayed line will scroll to display more information.
To view runway information from any of the airport information pages:
1. Make sure that the cursor is not flashing. If it is, press
C
.
2. Rotate
O
until the Runway Information page is displayed.
The Runway Information page displays the following information:
To access more runway information while the cursor is not flashing, rotate
K
.
If a localizer and ILS are used on the same runway, rotating
K
will display both sets
of information.
30
REFERENCE
Runway Information
Section
2
Runway information for KLAX.
Runway information for 3VS.
Identifier
ILS or localizer, identifier, frequency
and applicable runway
Runway length
Runway designation
Runway
surface
Runway
lighting
Runway information for IAN.
150man rev E 7/24/98 3:10 PM Page 30