Garmin Summit GPS Receiver User Manual


 
56
Reference
Physical
Case: Fully-gasketed, high-impact plastic alloy, waterproof to IPX7 stan-
dards (waterproof to 1 meter for 30 minutes)
Size: 4.4”H x 2”W x 1.2”D
Weight: Approx. 5.3 ounces (150g) w/batteries
Temperature Range: 5° to 158°F (-15° to 70°C)
3
(operating)
Performance
Receiver: Differential-ready, 12 parallel channel
Acquisition time: Approx. 15 seconds (warm start)
Approx. 45 seconds (cold start)
Approx. 5 minutes (First Time/AutoLocate™)
Update Rate: 1/second, continuous
Position Accuracy: 1-5 meters (3-15 ft) with DGPS corrections
1
15 meters (49 ft) RMS
2
Velocity Accuracy: 0.1 knot RMS steady state
Dynamics: Performs to specifi cations to 6 g’s
Interfaces: NMEA 0183 (versions 2.00-3.0), RTCM 104 (for DGPS corrections)
and RS-232 for PC interface
Antenna: Built-In
Compass: accuracy; ± 5 degrees
3
, resolution; 1 degree
Altimeter: accuracy; ± 10 feet
3
, resolution;1 foot
Power
Input: Two 1.5-volt AA batteries
4
Battery Life: Up to 16 hours of typical use
5
Specifi cations subject to change without notice.
1
With optional GARMIN Differential Beacon Receiver Input (such as GARMIN GBR 21).
2
Subject to accuracy degradation to 100m 2DRMS under the U.S. DOD Selective Availability program.
3.
Subject to proper user calibration.
4
The temperature rating for the eTrex Summit may exceed the usable range of some batteries. Alkaline batteries can
rupture at high temperatures. External power can only be applied using the GARMIN Auto Power Adapter (P/N
010-10203-00) or PC Interface Cable with Auto Power Adapter P/N 010-10268-00; this cable contains a voltage
regulator). Modifi cations or other applications will void the product warranty.
5
Alkaline batteries lose a signifi cant amount of their capacity as temperature decreases. Use lithium batteries
when operating the eTrex Summit in below-freezing conditions. Extensive use of screen backlighting
will drastically reduce battery life.
Appendix A
Specifi cations
190-00193-00_0D.indd 02/12/01, 10:09 AM56