Filter
Top Products
34
Reference
Using the Project feature, the eTrex Summit can create
a waypoint at a specifi ed distance and bearing using an
existing waypoint as a reference. You can change the
name, symbol and elevation on this page.
Projecting a Waypoint :
1. Select a waypoint on the WAYPOINT PAGE and press
ENTER.
2. Using the UP or DOWN Button, highlight the ‘PROJ-
ECT’ Button and press ENTER. The PROJECT WAY-
POINT Page will be displayed and a numeric name
will be assigned to the new waypoint.
3. The distance fi eld will be highlighted by default.
Press ENTER to display the EDIT NUMBER page.
4. With the EDIT NUMBER Page displayed, pressing the
DOWN Button will move the highlight to the next
number in the fi eld. With the desired digit selected,
press ENTER to activate the drop down number list.
5. Using the UP or DOWN Button select the correct
number then press ENTER. When all numbers are
entered correctly, highlight ‘OK’ and press ENTER.
6. Using the DOWN Button, highlight the bearing fi eld
and press ENTER to display the EDIT ANGLE Page.
7. With the EDIT ANGLE Page displayed, pressing the
DOWN Button will move the highlight to the next
number in the fi eld. With the desired digit selected,
press ENTER to activate the drop down number list.
8. Using the UP or DOWN Button select the correct
number then press ENTER. When all numbers are
entered correctly, highlight ‘OK’ and press ENTER.
9. The name, symbol and elevation can be changed
on this page as well. When all changes have been
made, highlight ‘OK’ and press ENTER to save the
waypoint. Highlight ‘GOTO’ and press ENTER to
save the waypoint and begin direct navigation to the
point.
PROJECT WAYPOINT
Page
EDIT NUMBER
Page
Review
Waypoint Page
190-00193-00_0D.indd 02/12/01, 10:08 AM34