Filter
Top Products
45
Reference
Display Page
The Display Page allows you to set the display back-
light timeout (on all the time, 15 or 30 seconds, and 1 or
2 minutes) and the display contrast.
To change the Light Timeout:
1. Press the PAGE Button and switch to the MENU
Page. Press the UP or DOWN Button and highlight
‘SETUP’. Press ENTER. The SETUP Page appears.
2. Press the UP or DOWN Button and highlight ‘DIS-
PLAY’ and press ENTER. Press ENTER on the ‘LIGHT
TIMEOUT’ fi eld.
3. Press the UP or DOWN Button and highlight your
selection and press ENTER. Press PAGE to get back
to the ‘SETUP’ page.
To adjust the display contrast:
1. Press the PAGE Button and switch to the ‘MENU’
Page. Press the UP or DOWN Button and highlight
‘SETUP’. Press ENTER. The ‘SETUP’ Page appears.
2. Press the UP or DOWN Button and highlight ‘DIS-
PLAY’ and press ENTER. Press the UP or DOWN
Button and highlight the ‘CONTRAST’ icon and press
ENTER.
3. Press the UP or DOWN Button and adjust the con-
trast and ENTER. Press PAGE to get back to the
‘SETUP’ page.
Units Page
Using your eTrex Summit with a paper map increases
the navigation power of both. If you are going to use a
map in conjunction with the eTrex Summit, you must
select the position format (grid), map datum, map units,
and north reference to match the map’s units. This is the
purpose of the Units Page. Regarding position format,
the eTrex Summit allows you to choose from more than
eighteen different grids. The eTrex Summit supports the
UTM/UPS and latitude/longitude grids because together
they cover the world.
You can set the backlight
to stay on all the time,
but watch your battery
power!
The Units Page allows you
match the units of the eTrex
Summit to the units of a
unique paper map you may
be using.
Display and
Units Pages
190-00193-00_0D.indd 02/12/01, 10:09 AM45