Filter
Top Products
30
Reference
Remember that pressing and hold-
ing the ENTER Button gives you
the ‘MARK WAYPOINT’ Page
where you can mark a waypoint.
Menu Page Selections
The Menu Page turns the eTrex Summit into a power-
ful navigation tool. With the Menu Page you can custom-
ize the display, transfer information from a computer to
eTrex Summit and back again, and manage and organize
all of your waypoints. Now let’s take a look at each of the
Menu Page selections.
Mark Waypoint Page
The MARK WAYPOINT Page allows you to create a
waypoint at the eTrex Summit’s current location or at a
location you enter in the position fi eld. You can also
change the symbol, name and elevation.
To change the symbol:
1. Press the PAGE Button and switch to the ‘MENU’
Page. Press the UP or DOWN Button and highlight
‘MARK’. Press ENTER.
2. Press the UP or DOWN Button and highlight the
small fl ag and press ENTER.
3. Using the UP or DOWN Button, scroll through the
symbols. Press ENTER to save the selection.
To change the name:
1. Press the PAGE Button and switch to the ‘MENU’
Page. Press the UP or DOWN Button and highlight
‘MARK’. Press ENTER. The MARK WAYPOINT Page
appears.
2. Press the UP or DOWN Button and highlight the
numeric name and press ENTER. The EDIT WAY-
POINT NAME Page will appear.
3. Use the UP or DOWN Button to highlight the
desired letter, press ENTER. A letter selection
window appears. Press the UP or DOWN Button to
select a new letter and press ENTER. Repeat step 3
until all letters are changed.
4. Press the UP or DOWN Button to highlight the
‘OK’ fi eld and press ENTER. The waypoint name is
changed.
Highlight the small fl ag symbol
and press ENTER to activate
the symbol selections.
Mark Waypoint
Page
190-00193-00_0D.indd 02/12/01, 10:08 AM30