Filter
Top Products
33
Reference
Review Waypoint Page
The Review Waypoint Page allows you to change
the waypoint symbol, name, and location (covered previ-
ously). You can also delete the waypoint, display the
waypoint on the Map Page, start a GOTO or project a new
waypoint using the selected waypoint as a reference.
To delete a waypoint:
1. On the REVIEW WAYPOINT Page, press the UP or
DOWN Button and highlight ‘DELETE’. Press the
ENTER Button. A confi rmation message box appears
asking if you really want to delete the waypoint. If
you do, press the UP or DOWN Button, highlight
‘YES’ and press ENTER.
2. If you change your mind and do not want to delete
the waypoint, press the UP or DOWN Button, high-
light ‘NO’ and press ENTER. The confi rmation mes-
sage box disappears and the waypoint remains in
memory (you can also press the PAGE Button to exit).
To start a GOTO:
1. On the REVIEW WAYPOINT Page, press the UP
or DOWN Button and highlight ‘GOTO’. Press the
ENTER Button. The ‘GOTO’ is activated with the
selected waypoint as the destination.
To view the selected waypoint on the Map
Page:
1. On the REVIEW WAYPOINT Page, press the
UP or DOWN Button and highlight ‘MAP’.
Press the ENTER Button. The selected waypoint
is displayed on a
map. You can use the UP/DOWN Buttons to zoom
in and out on the map. Press the PAGE Button and
switch back to the WAYPOINTS Page.
The REVIEW WAYPOINT Page
allows you to delete a waypoint.
You can start a GOTO from the
REVIEW WAYPOINT Page.
Review
Waypoint Page
190-00193-00_0D.indd 02/12/01, 10:08 AM33