Filter
Top Products
CM6000 Install Guide
Alarm and Starter System
www.firstechonline.com | www.compustar.com
Copyright 2009 Firstech, LLC.
Page 31
How To Program Options With 1 Way Remotes
With 2 Way
Remotes
(Wait for chirp
between each tap)
Scroll Through
Menu
(Wait for chirp
between each tap)
Wait for corresponding parking light ash and/or
siren chirp before selecting the option
Select Option 1
Select Option 2
Select Option 3
Select Option 4
Option
Menu 1
Lock + Unlock for 2.5
seconds then Lock +
Unlock for 2.5 seconds
Hold Trunk +
Key/Start for
2.5 seconds
Tap Lock
Button
Tap Unlock
Button
Tap Key/
Start Button
Hold Trunk +
Key/Start for
2.5 seconds
Option
Menu 2
Lock + Unlock for 2.5
seconds then Lock + Key/
Start for 2.5 seconds
Hold Trunk +
Key/Start for
2.5 seconds
Tap Lock
Button
Tap Unlock
Button
Tap Key/
Start Button
Hold Trunk +
Key/Start for
2.5 seconds
Option
Menu 3
Lock + Key/Start for
2.5 seconds then Lock +
Unlock for 2.5 seconds
Hold Trunk +
Key/Start for
2.5 seconds
Tap Lock
Button
Tap Unlock
Button
Tap Key/
Start Button
Hold Trunk +
Key/Start for
2.5 seconds
Option
Menu 4
Lock + Key/Start for 2.5
seconds then Lock + Key/
Start for 2.5 seconds
Hold Trunk +
Key/Start for
2.5 seconds
Tap Lock
Button
Tap Unlock
Button
Tap Key/
Start Button
Hold Trunk +
Key/Start for
2.5 seconds
STEP 2: Scroll through menu allowing for 1 parking light ash and/or siren chirp per step.
STEP 3: Once nished scrolling through the menu wait for the parking lights and/or siren chirp to conrm the
option number. i.e. option 2-04 will ash 4 times. Then use one of the table selections to select the option cor-
responding to your desired setting.
Resetting to Factory Defaults: To reset the options in a particular menu group, enter the menu shown in the
above tables. To reset options with a 2 Way remote tap button 3 three times. To reset options with a 1 Way
remote tap the Key/Start button 3 times. Wait for the siren to chip and parking lights to ash between each tap.
After the third tap, the option menu will reset and the siren will chirp three times. This must be done for each
option group that needs to be reset.