Filter
Top Products
26 Installing System Components
• Some cables have a connector with locking tabs; if you are disconnecting
this type of cable, press in on the locking tabs before you disconnect the
cable. As you pull connectors apart, keep them evenly aligned to avoid
bending any connector pins. Also, before you connect a cable, ensure that
both connectors are correctly oriented and aligned.
About the Illustrations
The illustrations used in this chapter identifies the component parts and does
not show step-by-step component removal or replacement instructions.
Recommended Tools
• #1 Phillips screwdriver
• #2 Phillips screwdriver
•Torx drivers
• Set of jeweler screwdrivers