![](http://pdfasset.owneriq.net/9/8b/98b3bb01-d07e-4114-ae86-ec6abb485bf2/98b3bb01-d07e-4114-ae86-ec6abb485bf2-bg61.png)
Black plate (97,1)
Cadillac SRX Navigation System (Include Mex) - 2012
Infotainment System 97
To hear all of the numbers
recognized by the system, say
“Verify” at any time.
1. Press
b /g.
2. Say “Digit Dial.”
3. Say each digit, one at a time,
that you want to dial. After each
digit is entered, the system
repeats back the digit it heard
followed by a tone. After the last
digit has been entered,
say “Dial.”
Once connected, the person called
will be heard through the audio
speakers.
Using the “Re-dial” Command
1. Press
b /g.
2. After the tone, say “Re-dial.”
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
.
Press b /g to answer the call.
.
Press 0 /c to ignore a call.
Call Waiting
Call waiting must be supported on
the cell phone and enabled by the
wireless service carrier.
.
Press b /g to answer an
incoming call when another call
is active. The original call is
placed on hold.
.
Press b /g again to return to
the original call.
.
To ignore the incoming call, no
action is required.
.
Press 0 /c to disconnect the
current call and switch to the call
on hold.
Three-Way Calling
Three-way calling must be
supported on the cell phone and
enabled by the wireless service
carrier.
1. While on a call, press
b /g.
2. Say “Three-way call”.
3. Use the dial or call command to
dial the number of the third party
to be called.
4. Once the call is connected,
press
b /g to link all the callers
together.
Ending a Call
Press 0 /c to end a call.