Filter
Top Products
49
• Replay: push this button to see a simulation of the saved track log on the map.
A green icon (4.5.12) will appear on the map screens to let you know it is not a
fly over but a simulation based on a real saved log.
• Delete: you can delete a track log if it is not needed any more. Touch & Go
Navigator will ask you to confirm this action.
• Track log options: this button in the upper right corner leads to a settings
screen where you can set up the track logging parameters:
o Update interval is how often track points will be saved. Position
information is normally received once a second from the GPS. If you do
not need such a detailed log, you can increase this number to save
track log space.
o Current autosave track size: this figure shows how much memory is
used by the automatically saved track logs.
o Enable auto-saving: when auto-saving is enabled, you do not need to
turn track log saving on and off manually. Touch & Go Navigator will
automatically start recording the track log as soon as GPS position is
available.
o Limit track DB size: here you can set whether or not to maximise the
size of the database where the automatically saved track logs are kept.
o Maximum track database size: here you can set the maximum
database size if the track database size limit is enabled using the
previous switch.
o Create NMEA/SIRF log: independently of the normal track log, you can
instruct Touch & Go Navigator to record the native GPS data received
from the GPS device. Touch & Go Navigator is capable of working with
GPS devices using either the NMEA or the SiRF protocol, so the saved
data will be in one of these formats. These logs are saved as separate
text files on the SD card, and they cannot be shown or replayed in
Touch & Go Navigator. They are for post-processing needs, should you
have any. Be careful when saving native GPS data, as it can soon eat
up available memory.