Filter
Top Products
7 - 31
FI
▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
Throttle position sensor resis-
tance
0 ~ 5 ± 1.0 k
Ω
at 20 °C (68 °F)
(yellow — black/blue)
2. Adjust:
• throttle position sensor angle
▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
a. Connecting the throttle position sensor cou-
pler to the wire harness.
b. Connect the digital circuit tester to the throt-
tle position sensor.
c. Measure the throttle position sensor volt-
age.
d. Adjust the throttle position sensor angle so
the measured voltage is within the specified
range.
e. After adjusting the throttle position sensor
angle, tighten the throttle position sensor
screws.
▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
Positive tester probe
→
yellow terminal
1
Negative tester probe
→
black/blue terminal
2
Digital circuit tester
90890-03174
Throttle position sensor voltage
0.63 ~ 0.73 V
(yellow — black/blue)
1
L
Y
B/L
2
THROTTLE BODY ASSEMBLY