Filter
Top Products
3 - 33
CHK
ADJ
CHANGING THE COOLANT
2. Remove:
• radiator cap retainer 1
• radiator cap 2
WARNING
_
A hot radiator is under pressure. Therefore,
do not remove the radiator cap when the
engine is hot. Scalding hot fluid and steam
may be blown out, which could cause seri-
ous injury. When the engine has cooled,
open the radiator cap as follows:
Place a thick rag or a towel over the radia-
tor cap and slowly turn the radiator cap
counterclockwise toward the detent to
allow any residual pressure to escape.
When the hissing sound has stopped,
press down on the radiator cap and turn it
counterclockwise to remove.
3. Remove:
• coolant reservoir cap 3
• coolant reservoir 4
4. Drain:
• coolant
(from the coolant reservoir)
5. Install:
• coolant reservoir
T
R
.
.
5 Nm (0.5 m · kg, 3.6 ft · lb)
6. Remove:
• coolant drain bolt 1
(along with the copper washer)
7. Drain:
• coolant
(from the engine and radiator)
8. Check:
• copper washer 1
• coolant drain bolt 2
Damage → Replace.
9. Install:
• coolant drain bolt
New
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)