Filter
Top Products
4 - 8
CHAS
FRONT WHEEL AND BRAKE DISC
2. Tighten:
• wheel axle 1
• wheel axle pinch bolts 2
CAUTION:
_
Before tightening the wheel axle nut, push
down hard on the handlebar several times
and check if the front fork rebounds
smoothly.
NOTE:
To tighten the wheel axle pinch bolt, tighten
the outer and inner bolts to the specified
torque, and then tighten the outer bolt to the
specified torque again.
3. Install:
• brake caliper bolts
WARNING
_
Make sure the brake hose is routed prop-
erly.
T
R
.
.
59 Nm (5.9 m · kg, 43 ft · lb)
T
R
.
.
18 Nm (1.8 m · kg, 13 ft · lb)
T
R
.
.
40 Nm (4.0 m · kg, 29 ft · lb)
EAS00548
ADJUSTING THE FRONT WHEEL STATIC
BALANCE
NOTE:
_
• After replacing the tire, wheel or both, the
front wheel static balance should be
adjusted.
• Adjust the front wheel static balance with the
brake disc installed.
1. Remove:
• balancing weight(s)