Filter
Top Products
4 - 5
CHAS
FRONT WHEEL AND BRAKE DISC
7. Check:
• wheel bearings
Front wheel turns roughly or is loose →
Replace the wheel bearings.
• oil seals
Damage/wear → Replace.
8. Replace:
• oil seals
• wheel bearings
▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
a. Clean the outside of the front wheel hub.
b. Remove the oil seals 1 with a flat-head
screwdriver.
NOTE:
_
To prevent damaging the wheel, place a rag 2
between the screwdriver and the wheel sur-
face.
c. Remove the wheel bearings 3 with a gen-
eral bearing puller.
d. Install the new wheel bearings and oil seals
in the reverse order of disassembly.
CAUTION:
_
Do not contact the wheel bearing inner race
4
or balls
5
. Contact should be made only
with the outer race
6
.
NOTE:
_
Use a socket 7 that matches the diameter of
the wheel bearing outer race and oil seal.
▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
New
2
1
New