Filter
Top Products
5 - 59
ENG
BALANCER DRIVEN GEAR
INSTALLING THE BALANCER DRIVEN
GEAR AND BALANCER DRIVE GEAR
1. Install:
• washer
• balancer drive gear 1
• straight key 2
• balancer driven gear 3
• straight key
• primary drive gear
• water pump drive gear
NOTE:
• Align the punch mark a on the balancer
drive gear with the punch mark b on the bal-
ancer driven gear.
• Install the key with its blunt surface facing c
the crankshaft.
1
3
2
a
b
2
c
2. Install:
• lock washer 1
• primary drive gear nut 2
• lock washer 3
• balancer driven gear nut 4
NOTE:
Place an aluminum plate a between the teeth
of the balancer drive gear and balancer driven
gear.
3. Bend the lock washer tab.
2
1
a
4
a
3
New
T
R
.
.
80 Nm (8.0 m · kg, 58 ft · lb)
New
T
R
.
.
70 Nm (7.0 m · kg, 50 ft · lb)