Yamaha XT660X(S) Automobile User Manual


 
1 - 6
GEN
INFO
CHECKING THE CONNECTIONS
EAS00026
CHECKING THE CONNECTIONS
Check the leads, couplers, and connectors for
stains, rust, moisture, etc.
1. Disconnect:
lead
coupler
connector
2. Check:
lead
coupler
connector
Moisture
Dry with an air blower.
Rust/stains
Connect and disconnect sev-
eral times.
3. Check:
all connections
Loose connection
Connect properly.
NOTE:
_
If the pin
1
on the terminal is flattened, bend it
up.
4. Connect:
lead
coupler
connector
NOTE:
_
Make sure all connections are tight.
5. Check:
continuity
(with the pocket tester)
NOTE:
_
If there is no continuity, clean the terminals.
When checking the wire harness, perform
steps (1) to (3).
As a quick remedy, use a contact revitalizer
available at most part stores.
Pocket tester
90890-03112