Filter
Top Products
3 - 59
CHK
ADJ
CHECKING THE FUSES
2. Check:
• fuse 1
• fuse box 1 2
• fuse box 2 3
▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
a. Connect the pocket tester to the fuse and
check the continuity.
NOTE:
_
Set the pocket tester selector to “Ω × 1”.
b. If the pocket tester indicates “∞”, replace
the fuse.
▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
3. Replace:
• blown fuse
▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
a. Set the main switch to “OFF”.
b. Install a new fuse of the correct amperage
rating.
c. Set on the switches to verify if the electrical
circuit is operational.
d. If the fuse immediately blows again, check
the electrical circuit.
Pocket tester
90890-03112
Fuses
Amperage
rating
Q’ty
Main 30 A 1
Headlight 20 A 1
Signaling system 10 A 1
Ignition 10 A 1
Fuel injection system 10 A 1
Parking lighting system 10 A 1
Radiator fan motor 7.5 A 1
Backup (immobilizer
unit, meter assembly)
10 A 1
Reserve 30 A 1
Reserve 20 A 1
Reserve 10 A 1
Reserve 7.5 A 1
2
3
1