Yamaha XT660X(S) Automobile User Manual


 
5 - 15
ENG
CYLINDER HEAD
d. Install the spring and timing chain tensioner
cap bolt.
▲▲▲ ▲▲▲ ▲▲▲ ▲▲▲ ▲▲▲ ▲▲▲ ▲▲▲
6. Turn:
crankshaft
(several turns counterclockwise)
7. Check:
•“I mark a
NOTE:
Check that the I mark on the A.C. magneto
rotor is aligned with the stationary pointer b
on the A.C. magneto cover.
•“I mark c
NOTE:
Check that the I mark on the camshaft
sprocket is aligned with the stationary pointer
d on the cylinder head.
Out of alignment Correct.
Repeat steps 4-7, if necessary.
8. Tighten:
camshaft sprocket bolts
CAUTION:
_
Be sure to tighten the camshaft sprocket
bolts to the specified torque to avoid the
possibility of the bolts coming loose and
damaging the engine.
9. Measure:
valve clearance
Out of specification Adjust.
Refer to ADJUSTING THE VALVE
CLEARANCE in chapter 3.
T
R
.
.
Timing chain tensioner cap bolt
20 Nm (2.0 m · kg, 14 ft · lb)
a
b
c
d
T
R
.
.
20 Nm (2.0 m · kg, 14 ft · lb)