Filter
Top Products
Routes
38
Creating a GOTO Route
The instructions here describe the most common, and easiest way to create a GOTO
route.
1. Press
GOTO.
2. Use the POI database to select the POI to be the
destination.
Note: Detailed instructions for searching the POI
database can be found in the Points of Interest section
of this manual.
3. With the POI highlighted, press
ENTER.
4. If you already have a GOTO you will be asked to
confirm the creation of this GOTO.
After pressing
ENTER, the last viewed navigation screen will be
displayed, updated as needed to provide information about the
GOTO route you have created. On the
Map screen, a line will be
drawn representing the GOTO route. The
Compass screen will
change to display the name of the POI used as the destination in the screen header
bar and an icon representing the destination outside the diameter of the compass.
South Lake Tahoe
CABIN
50
88
88
89
50
Rocky Slo
3.50mi
Heading Speed
48.0
M
H
030°M
Map screen with a GOTO
route active. Notice the
line on the screen that
graphically displays the
route.