Filter
Top Products
Step Two: Where Do You Want To Go?
Now that the eXplorist knows where you are, you need to tell it where you want to go.
There are many different ways you can do this, but the simplest and most commonly
used is a “GOTO” route. This is a one-leg route with a beginning (where you are now)
and a destination (where you want to go). The destination is selected by using the
Points of Interest database. This database has two main options; positions you have
saved (
My Points of Interest) or points of interest that have been preloaded into your
eXplorist (
Background Map).
Creating a GOTO route is as simple as pressing the
GOTO button and selecting the des-
tination from the points of interest database.
Step Three: Calculating Movement
As you move, your eXplorist is constantly calculating new positions, comparing the new
position to the previous position and calculating such things as heading and speed.
This is all done in the eXplorist’s software communicating with the satellites and is
instantaneously shown on your display.
Step Four: Providing Directions
Your eXplorist constantly computes a direct line from your present position to your desti-
nation. From that it will provide you instructions to guide you along that straight path.
Unless you are on a large body of water, it will be unlikely that you will be able to follow
these instructions exactly. To compensate for that, your eXplorist automatically updates
the route, providing you with up-to-date information about getting to your destination.
GOTO routes are the simplest and most commonly used feature of your eXplorist 200. With
just the
GOTO button the eXplorist will provide you with the tools needed to get to any point of
interest stored in your database.
Saving Your Position
Another commonly used feature of the eXplorist is saving your position to the Points of Interest
database. This feature is accessed by pressing the
MARK button. When saving your position,
you can also add attributes like a selected icon or a name for the point of interest. This will
help you find this spot in the future when accessing it from the points of interest database.
Suppose you have set up camp for the night. Tomorrow you plan on doing some nature
exploring and you want to be able to come back to the campsite when you are done.
Press the
MARK button and set the name of the point of interest to “Camp”. After your
hiking is done, simply use the
GOTO button and select “Camp” from the list of My
Points of Interest.
It’s that simple to find your way back.
While out fishing on the lake, you come across the perfect spot for catching your limit.
Next year you want to be able to come back to this very same spot. Turn on your
eXplorist and after it has computed your position, press the
MARK button to save it.
This time you can enter the name “Catfish1” and save your point of interest. Next year
you can be back at the same hot spot with just a press of the GOTO button.
Using the eXplorist 200
6