Filter
Top Products
Points of Interest
35
Copying a Preloaded POI
POI’s that have been preloaded as part of the background map can be saved as a user-
entered POI. This does not delete a preloaded POI (preloaded POI’s can not be deleted) it
just copies it to the
My Points of Interest portion of the database.
1. Press
MENU.
2. Use the
Arrow joystick to highlight Pts of Interest.
3. Press
ENTER.
4. Use the
Arrow joystick up/down to highlight Background Map.
5. Use the
Arrow joystick left/right to select Nearest or Alphabetical.
6. Press
ENTER.
7. [Only if Alphabetical selected] Use the Arrow joystick and the ENTER button to
enter the first few characters of the POI you are searching for. Highlight
OK and
press
ENTER to continue.
8. Use the
Arrow joystick to highlight the POI to be copied.
9. Press ENTER.
10. Use the
Arrow joystick to highlight Save.
11. Press
ENTER.
Steps 12 through 14 are optional.
12. Use the
Arrow joystick to highlight the field you want to change.
13. Press
ENTER.
14a. If the icon field was selected: Use the
Arrow joystick to select the icon desired and
press ENTER. To aid in your selection, the type of icon selected is displayed in the
information block at the top of the keypad.
14b. If the Name field was selected. Use the
Arrow joystick to select the character
desired and press
ENTER. If you make a mistake, highlight Back and press
ENTER. To access the lower case characters, highlight Shift and press ENTER.
To clear everything and start over, highlight
CLEAR and press ENTER. When you
are satisfied with the name, highlight
OK and press ENTER.
Note: User-entered POI names can only be eight characters long (including
spaces).
14c. If the Message field was selected. Use the keypad displayed just as was described
in 13b to enter a message for this POI.
15. When the Icon, Name and Message fields are done, use the
Arrow joystick to
highlight
Save.
16. Press
ENTER.