Filter
Top Products
Chapter 5 Command Reference
Receiver Initialization
Operating and Programming Guide 5-111
Table 5-2. System Preset (Factory Default) Parameter Settings
Summary
Commands :SYSTem:PRESet
*ESE ... 0 (NV
*
) — See footnotes on the
bottom of the next page
*SRE ... 136 (NV)
:DIAGnostic:LOG:CLEar Log is cleared.
:DIAGnostic:LOG:COUNt? 2
:DIAGnostic:QUERy:RESPonse? cleared.
:FORMat:DATA ... ASCII (NV)
:GPS:POSition ... N,0,0,0,E,0,0,0,0 (NV)
LAST is also set to this position.
(NV)
:GPS:POSition:HOLD:LAST? N,0,0,0,E,0,0,0,0 (NV)
:GPS:POSition:HOLD:STATe? 0 (NV)
:GPS:POSition:SURVey:STATe ... ONCE
:GPS:POSition:SURVey:STATe:POWerup ... ON (NV)
:GPS:REFerence:ADELay ... 0.0 (NV)
:GPS:SATellite:TRACking:EMANgle ... 10 (NV)
:GPS:SATellite:TRACking:IGNore:STATe? ... 0 for every PRN.
:GPS:SATellite:TRACking:IGNore ... No satellites ignored (NV)
:GPS:SATellite:TRACking:INCLude ... All satellites included (NV)
:GPS:SATellite:TRACking:INCLude:STATe? ... 1 for every PRN.
:PTIMe:TZONe ... 0,0 (NV)
:PULSe:CONTinuous:PERiod ... 1 (NV)
:PULSe:CONTinuous:STATe ... OFF (NV)
:PULSe:STARt:DATE ... 1994,1,1 (NV)
:PULSe:STARt:TIME ... 0,0,0 (NV)
:SENSe:DATA? Data is cleared.
:SENSe:DATA:MEMory:OVERflow:COUNt? All counts are cleared (V
**
).
:SENSe:DATA:MEMory:SAVE ... FIRSt (NV)
:SENSe:DATA:POINts? All responses become 0 (zero).
(V)
:SENSe:DATA:TSTamp? ... All timestamps cleared.