Filter
Top Products
Chapter 5 Command Reference
Operating Status
Operating and Programming Guide 5-53
Monitoring Status/Alarm Conditions ___________
(continued)
Command Error Status
This group contains events which indicate a command error has occurred, and
an event which indicates that the power has cycled. (See Figure 5-1.)
The following status events indicate that a command error occurred:
• The Query Error status event (bit 2). Errors -400 through -499 are query
errors.
• The Hardware/Firmware Error status event (bit 3). Errors -300 through
-399 are hardware/firmware errors.
• The Semantic Error status event (bit 4). Errors -200 through -299 are
semantic errors.
• The Syntactic Error status event (bit 5). Errors -100 through -199 are
syntactic errors.
• The Power Cycled status event (bit 7) is set at powerup.