![](http://pdfasset.owneriq.net/2/f9/2f9a1b18-4686-451d-b1bd-e142896b65f6/2f9a1b18-4686-451d-b1bd-e142896b65f6-bg83.png)
Chapter 5 Command Reference
Operating Status
Operating and Programming Guide 5-63
Monitoring Status/Alarm Conditions ___________
(continued)
!
Reading and Qualifying Receiver Status (continued)
Reading an enable register (figures 5-3 and 5-1) identifies which events from
the corresponding event register are enabled to report to the corresponding
summary bit of the summarizing condition register.
Expanded Syntax
:STATus:OPERation:ENABle?
:STATus:QUEStionable:ENABle?
:STATus:OPERation:HARDware:ENABle?
:STATus:OPERation:HOLDover:ENABle?
:STATus:OPERation:POWerup:ENABle?
Response
The range is 0 to 65535.
The response value represents the sum of the binary-weighted values of the
register. The value of unused bits is zero.
Theory
Reading/Querying an enable register does not change its contents.
:STATus:<register>:ENABle?
RESPONSE FORMAT
Reads the specified enable register.
±
dd