Filter
Top Products
Chapter 2: Basic Operation 5
2 Basic Operation
Display layout
The ST4000+ autopilot display provides the following information:
• If the display shows no distance unit all distances are in
kilometres (Km), otherwise distances are in nautical miles (nm
)
or statute/land miles (SM).
• The bar graph at the bottom of the screen is normally a
direction-to-steer indicator (you can change this in User setup,
see page 104). The information displayed on the bar graph varies
according to the autopilot mode:
Autopilot mode Information displayed on bar graph
Standby Rudder bar (only if a rudder position sensor is fitted)
Auto Heading error bar
Track Cross track error (XTE) bar, in 0.02 nm increments
Wind Vane Wind angle error bar
Rudder or Steer direction indicator
(bar graph in 2˚ increments)
Port and Starboard
direction-to-steer
indicators
Autopilot mode
indicators
Response level indicator
Distance units
Heading indicators
Variable text region (up to 9 characters/digits)
D3316-2
Calibration mode
indicator