Filter
Top Products
4-4 Raynav 300 GPS Plotter
Bearing Mode
This is the mode (magnetic or true) of all the bearing and heading data
displayed as indicated in the status bar.
Cursor Reference
The mode of the bearing data displayed for the cursor readout. The
bearing information can be displayed in either of two forms:
• Relative: The bearing relative to your vessel’s heading.
• Mag/True: The actual bearing in either degrees magnetic or degrees
true. This option is only available if you have heading data from a
compass.
If you choose this mode, the selection you made for the previous
parameter (Bearing Mode), °M or °T, is displayed in the cursor
(
RNG/BRG) data boxes. The current units are shown for the heading
value in the status bar.
Cursor Readout
This option controls whether the cursor data is shown in latitude and
longitude or in range and bearing. Alternatively, you can show both types
of readout, in separate boxes, or turn the cursor data box off.
You can also turn the cursor readout box(es) on and off during normal
operation, via the
SCREEN default soft key (see Chapter 2).
Day/Night
This option allows you to change the target presentation between DAY and
NIGHT modes.
In normal day presentation, black targets are displayed on a white
background. If
NIGHT presentation is selected, the image is reversed, so
that white targets are shown on a black background to reduce the intensity
of the image.
LANGUAGE English (UK),
English (US),
Danish, French, German,
Dutch, Icelandic, Italian,
Norwegian, Portuguese,
Spanish, Swedish, Finnish
English (US)
Simulator OFF or ON OFF
Table 4-1: System Set Up Parameters (Continued)
Menu Options
Factory
Default
New
Default
81171_4.BOOK Page 4 Thursday, November 29, 2001 11:34 AM