Filter
Top Products
User's Guide Destinator 32
Search for a Location
Stops Actions
You can tap the Actions button for the following command options:
Set as Origin
Lets you designate the selected address as the route origin. You would use this
command when calculating a route from a point other than your current location.
Tap the
Free Map Browsing button to disconnect from the GPS receiver.
Add Stop
Lets you add a location by specifying an address from recent locations, favourite
locations, or pre-defined POIs, such as fuel, food, or lodging.
Rename Stop
Lets you change the stop information, such as name, comments, or route group.
Delete Stop
Lets you remove a selected stop.
Optimize Route
Your trip itinerary is created by the sequence of stops entered. This may not be
the most efficient route. When you click Optimize Stops, Destinator changes the
order of stops to create the most efficient route.
Information
This button displays the location’s address information.
Navigating to an SMS Address
You can navigate to an address received from an SMS message. This feature is available only
when both the sender and receiver have phone-enabled navigation devices that run
Destinator.
When an SMS message is sent to a phone-enabled navigation device, an Alert
icon
appears on the Main Map screen. Tap this icon to open the SMS inbox and select the SMS
message. Tap Next to display the location on the Show Map screen. Tap the GO button to
calculate the route to the address in the SMS message.
Figure 36 – Receiving an Address by SMS Message