PYLE Audio plnd 35 GPS Receiver User Manual


 
User's Guide Destinator 17
Search for a Location
Notes:
Favourite Alert settings affect all Favourites Groups.
The 2nd Alert must be set to go off at closer distance than the 1st Alert.
Alerts can be set for a group but not for individual locations. Of course, you can always create a group that
has just one location.
You can disable the alerts for all groups by selecting the 1st Alert setting to Off.
You can disable the alerts for a particular group by removing the tick next to the selected group. Activate
that disabled alert by adding a tick next to the selected group.
Figure 21 - Disabled Favourite Alerts
Add Favourite Locations
Tap MY FAVOURITES or any selected group that you have created to display its locations. You can save a
location to your favourites groups from the Address, Recent Locations, or POI screens. For more
information, see "
Add to My Favourites (on page 13)".
Favourites Actions
From this screen, you can tap the Actions button to display the following commands.
Set as Origin
Lets you designate the selected location as the route origin. You
would use this command when calculating a route from a point
other than your current location. Tap the
Free Map Browsing
button to disconnect from the GPS receiver.
Show Map
Lets you see the selected address on the map.
Edit Favourite Location
Lets you change the name, comment, or group location for the
selected location.
Delete Favourite Location
Tap the button to remove the selected location.
Send SMS
If you are using a phone-enabled navigation device, you can send
your current location in an SMS message. For more information,
see
Sending an SMS Address (on page 33).
Information
This button displays additional address information, such as
address details, phone number, and other comments about your
favourite location that you have entered.