Filter
Top Products
ACT2000
6 ACT2000 GENERAL SPECIFICATIONS
Power Input
Nominal Voltage: 120 VDC
Minimum Voltage: 80 VDC
Maximum Voltage: 160 VDC
Maximum Current: 20A
Typical Transient Current: +20A < 60ms; +10A < 600ms; -5A < 100ms
Typical Continuous Current: < 1A
RUN and RESET Command Input
ON Voltage: 12 to 32 VDC; +24 VDC Nominal
ON Current: 6.5 mA Nominal @ 24 VDC
OFF Voltage: 3.5 VDC Maximum
OFF Current: 0.75 mA Maximum
FAULT and OVERTEMP Output
OFF Voltage: 32 VDC Maximum
OFF Leakage Current: 150 µA Maximum
ON Current: 25 mA Maximum
ON Voltage Drop: 1.5 VDC Maximum @ 25 mA
Analog Command Input
Current: 4 to 20 mA; 25 mA Maximum
Voltage: 5 VDC Maximum
Internal Impedance: 200 Ω
Position and Motor Current Feedback Analog
Current: 4 to 20 mA
External Load Resistance: 500 Ω Maximum
Maximum Common Mode Voltage
±200 VDC User I/O to 120 VDC Return (less serial interface)
Temperature Limits
Operating Ambient: -40° C (-40° F) to +93° C (+200° F)
Operating Fuel: -40° C (-40° F) to +125° C (+257° F)
Storage: -40° C (-40° F) to +125° C (+257° F)
Maximum Velocity 10 in/sec
Maximum Continuous Force 500 lbf (100% Duty Cycle)
Maximum Peak Force 1000 lbf (100% Duty Cycle)
Maximum Stroke 5.9 in (Configuration Dependent)
Accuracy
± 1% Full Stroke
Environmental Rating CSA Type 3, European IP65
EMC EN 50081-2 and EN50082-2 for DC powered industrial equipment
Vibration Mil-Std-810E, Category 4 (5 – 2000 Hz)
Mean Time Before Unscheduled Removal 30,000 Hours
Life Cycles 32,000 Minimum
Electrical Connection Power Harness: (4) AWG 14, 90 in, ¾ NPT Conduit (EP)
Digital Harness: (17) AWG 20, 90 in, ¾ NPT Conduit (EP)
North American Certifications
European Directive Compliance (CE Mark
CSA Class I, Div 1, Group B, C, D; T4
EEx d, IIB+H
2
; T4
94/9/EC Potentially Explosive Atmospheres (ATEX)
98/37/EC Machinery Directive
89/336/EEC Electromagnetic Compatibility Directive (EMC)
Materials
Housings 6061-T6 Anodized Aluminum
Conduit Union Zinc Plated Steel
Extension Rod 17-4 PH CRES
Clevis 17-4 PH CRES
Rod End Bearing Aluminum Bronze
Seals Nitrile, RTV and Teflon
Dimensions 6.0 in x 16.0 in
Approx. Dry Weight Pin Mounted 35 lbs. Max
Flange Mounted 50 lbs. Max
6-1