Filter
Top Products
- 8 - Operating the Navigation System
The device is being supplied by an external power source. The battery
is being charged.
The device is being supplied by its internal battery. The battery charge
is sufficient.
The device is being supplied by its internal battery. The battery charge
is low.
TMC (Traffic Information)
A TMC Traffic Receiver (CY-TM200N) may be connected to the
navigation system. This enables the system to change the route
dynamically in order to avoid a traffic jam, for example.
Note: This function is only available if TMC traffic messages are being
transmitted in the country in which you are travelling. This is not the
case in all countries.
The TMC symbol can display the following TMC reception status:
No Symbol: There is no TMC Traffic Receiver connected, or the
connected or built-in TMC Traffic Receiver is not operational.
Tuning: The TMC Traffic Receiver is operational, but cannot find a
station that is transmitting TMC signals.
TMC on Standby: Traffic messages can be received.
Information: For details on TMC functionality, please refer to chapter
"
TMC (Traffic Information)" on page 33.
3.6 Software Keyboard
A software keyboard appears on the screen when text entries are
necessary.
All entries can be made on the software keyboard using the fingertips.
Only capital letters can be entered.
Note: Tap Settings
> Basic Settings > Keyboard layout to select one of
several available keyboard layouts. For detailed information on
configuration, please refer to chapter "
Changing the Navigation
Settings" on page
35.
When entering town or street names you need not enter any special
characters or umlauts. The navigation system fills in these characters
for you automatically. If, for example, you are searching for “Würzburg”,
then simply enter "WURZBURG". Special characters may be helpful
when naming saved destinations and itineraries, however.