Filter
Top Products
Useful Functions - 33 -
9 Useful Functions
9.1 GPS Status, Storing the Current Location
In the GPS STATUS window, you will find an overview of the data the
navigation system retrieves from the received GPS signals.
1. In the M
ENU window, tap on Information > GPS.
The current location can be stored in the F
AVOURITES list.
2. Tap the Save Position
button.
The S
AVE DESTINATION AS... dialog window opens. The cursor
blinks in the Name
field.
3. Enter a name for the destination.
4. Tap the Home Address
button if you want to save the destination as
your home address.
The Yes
value is now written in black and underlined.
You can then always start navigation to this location very quickly by
tapping Destination
> Home in the MENU window.
5. Tap the Store a Voice Command
button if you want to set up a
voice command for this destination, and follow the instructions
given on the screen.
You can then always start navigation to this destination very quickly
by tapping Destination
> Voice Command in the MENU window and
repeating the stored command into the navigation device.
6. Tap the Change Icon
button if you want to change the icon which is
to be seen before the name of the destination. Then tap the icon
you want to use.
7. Tap the Save
button.
9.2 TMC (Traffic Information)
An external TMC Traffic Receiver (CY-TM200N) may be connected to
the navigation system. This enables the system to change the route
dynamically in order to avoid a traffic jam, for example.
Note: This function is only available if TMC traffic messages are being
transmitted in the country in which you are travelling. This is not the
case in all countries.
9.2.1 Displaying Traffic Messages
The current traffic reports are available via the options of several
windows.