Filter
Top Products
Working with the Map - 27 -
Information: For more detailed information, please refer to chapter
"
Map in Destination Search Mode" on page 30.
Functions of the Map in Standard Mode
When the map is open in Standard mode, tap any point on the map.
Buttons with various functions will be displayed.
2D/3D
: Changes between 2D and 3D mode. The symbol for the mode that is
currently set is marked orange.
Day/Night
: Changes the display mode between "day" and "night". The symbol
for the mode that is currently set is marked orange.
8.3 Map in Preview Mode
You have entered a destination and tapped the Start Navigation button.
- OR -
You have planned or loaded a route and tapped the Show Route
button.
The map opens in Preview mode. The entire route is visible.
1 The route is highlighted in orange.
2 A triangle in red shows the current position.
If you display a planned or loaded route and the specified starting point
is not your current location, then the current position is possibly not
shown on the preview.
3 The destination is marked with a little flag.
If you display a planned or loaded route, the starting point and each
route point will be marked with a little flag.