Panasonic CN-GP50N GPS Receiver User Manual


 
- 28 - Working with the Map
4 You will see the total distance for the route in a small info box, together
with the estimated trip time and the estimated time of arrival.
Note: The data displayed depends on the settings you have configured
in the M
ENU window under Settings > Basic Settings.
If you display a route with several stages, you will see this information
for each stage.
Tap the Route Profile button, in order to view or change the settings
on which the route calculation is based.
Tap the Start Navigation button in order to begin the trip.
When you display a planned or loaded route, the route may be
recalculated. Starting point for the calculation is your current
location. You will now be guided to the first route point entered.
Tap on (Destination Search), in order to view the map in
Destination Search mode. (Refer to "
Map in Destination Search
Mode” page
30)
8.4 Map in Navigation Mode
After the route has been viewed in Preview mode, the navigation has
been started.
The map opens in Navigation mode.
1 Signposting to be followed is displayed here.
2 Effective speed limits are displayed here (where available).
3 The route is marked by the colour orange.
4 The traffic lanes to be followed to your destination are depicted in the
colour orange.