Filter
Top Products
1 Introduction
12 MiLLennium GPSCard and Enclosures Guide to Installation & Operation
PROPAK II
The NovAtel ProPak II is a rugged, reliable enclosure for adverse environments.
The ProPak II has these features:
•
rugged shock, water, and dust-resistant enclosure constructed of extruded aluminum sealed by two end-caps.
•
two serial communication ports and a strobe port
•
optional mounting plate
•
one straight and one null-modem serial data cable
•
one I/O strobe cable
•
one 4-pin LEMO plug connector to cigarette-lighter plug with built-in 3-amp fuse
•
NovAtel’s GPSolution graphical user interface software
The ProPak II is intended to be used with the following NovAtel accessories and options:
•
Model 502, 503, or 512 GPSAntenna - dual-frequency, active antennas designed for high-accuracy applications
•
Model C005, C015, or C030 (5, 15 or 30 m length) coaxial cable - to connect the GPSAntenna to the ProPak II
•
4-pin LEMO plug connector to 4-pin LEMO plug connector (NovAtel part number: 01016724 [33.5 cm] or
01016725 [0.75 cm])
•
Model GPS-APRO Auto-ranging AC/DC converter and power cables
Note: The unit is sealed to provide protection against adverse environmental conditions; therefore, any attempt to
open the case will impair the water-resistant qualities of the enclosure, and void the warranty.