Filter
Top Products
᭺
4
To return the bench seats to a seating posi-
tion, reverse this process. Raise the seat-
backs to an upright position. Make
sure to hold the seat belts above the
seat cushion, then push the seat cush-
ion down into place.
Removing the 2nd row bench seat
cushions
The rearseat cushion can beremoved to provide
additional space when folding the 2nd row seat-
backs flat. To remove the 2nd row bench seat
cushions:
1. Pull thestraps forward, locatedin the center
of each seat cushion, to fold the seat cush-
ions forward.
2. Lift up and fold each of the red release
handles on theseat base toward the front of
thevehicle.This willreleasethe seatcushion
from the seat base.
3. Then lift up on the seat cushion to remove it
from the seat base. Be sure to store it in a
secure place.
To return the rear seatback to a seating position:
1. Push the anchor bars on the bottom of the
seat cushions down into the seat base.
2. Rotate the seat cushion toward the rear of
the vehicle and push down until they are
foldedflattosecureeachseatcushiontothe
seat base. Make sure to hold the seat
belts above theseat cushion and prop-
erly push the seat cushion down into
place.
WARNING
● Never allow anyone to ride in the cargo
area or on the rear seat when it is in the
fold-down position. Use of these areas
bypassengers withoutproper restraints
could result in serious injury in an acci-
dent or sudden stop.
● Do not allow people to ride in any area
of yourvehicle thatis notequipped with
seats and seat belts. Be sure everyone
in your vehicle is in a seat and using a
seat belt properly. Never ride in the rear
seat unless the seat bottom cushions
are in place and latched.
LRS0580 LRS0585
Safety—Seats, seat belts and supplemental restraint system 1-13