Filter
Top Products
To lower, push and hold the lock knob and push
the headrest down.
Removal
Use the following procedure to remove the ad-
justable headrests.
1. Pull the headrest up to the highest position.
2. Push and hold the lock knob.
3. Remove the headrest from the seat.
4. Store theheadrest properlyso it isnot loose
in the vehicle.
5. Reinstall and properly adjust the headrest
before an occupant uses the seating posi-
tion.
Install
1. Align the headrest stalks with the holes in
the seat. Make sure the headrest is facing
the correct direction. The stalk with the ad-
justment notches
᭺
1
must beinstalled inthe
hole with the lock knob
᭺
2
.
2. Push and hold the lock knob and push the
headrest down.
3. Properly adjust the headrest before an oc-
cupant uses the seating position.
LRS0889 LRS0890 LRS0891
Safety—Seats, seat belts and supplemental restraint system 1-9