Filter
Top Products
NOTE:
The filters are marked with air flow arrows.
The end of the filter with the arrow should
face the rear of the vehicle. The arrows
should face downward.
3. Insertthefirst filterinto thehousing andslide
it over to the right. Insert the second filter
into the housing.
4. Replace the filter cover.
5. Install the glove box door.
CLEANING
If your windshield is not clear after using the
windshield-washer or if a wiper blade chatters
when running, wax or other material may be on
the blade or windshield.
Cleantheoutsideofthewindshieldwitha washer
solution or a mild detergent. Your windshield is
cleanif beadsdo notform whenrinsing withclear
water.
Cleaneach bladeby wipingitwith aclothsoaked
in a washer solution or a mild detergent. Then
rinse the blades with clear water. If your wind-
shield is still not clear after cleaning the blades
and using the wiper, replace the blades.
CAUTION
Worn windshield wiper blades can dam-
age the windshield and impair driver
vision.
REPLACING
Replace the wiper blades if they are worn.
1. Lift the wiper arm away from the windshield.
᭺
2
Push the release tab, then move the wiper
blade down the wiper arm to remove.
᭺
3
Remove the wiper blade.
4. Insert the new wiper blade onto the wiper
arm until it clicks into place.
5. Rotate wiper blade so the dimple is in the
groove.
LDI0404 WDI0408
WINDSHIELD WIPER BLADES
Maintenance and do-it-yourself 8-19