Filter
Top Products
Black plate (54,1)
Model "R35-D" EDITED: 2009/ 3/ 11
through 6.
Rear-facing — step 2
Rear-facing
Follow these steps to install a rear-facing child
restraint using LATCH system:
1. Position the child restraint on the seat.
Always follow the child restraint manufac-
turer’s instructions.
Rear-facing — step 2
2. Secure the child restraint anchor attach-
ments to the LATCH lower anchors. Check
to make sure the LATCH attachment is
properly attached to the lower anchors.
1-20 Safety — Seats, seat belts and supplemental restraint system