Filter
Top Products
Black plate (200,1)
Model "R35-D" EDITED: 2009/ 3/ 11
slope, or the vehicle may suddenly
accelerate due to accidental operation
of the accelerator pedal, possibly caus-
ing an accident.
The control of the dual clutch transmission,
Bilstein DampTronic
®
electronically controlled
shock absorbers and Vehicle Dynamic Control
(VDC) can be changed to the desired modes by
operating the setup switches. Select the desired
mode best suited to the driving conditions.
NOTE:
Bilstein DampTronic
®
is a registered trade-
mark of ThyssenKrupp Bilstein Suspen-
sion GmbH.
1. Transmission setup switch
2. Suspension setup switch
3. Vehicle Dynamic Control (VDC) setup switch
HOW TO SWITCH THE MODES
Move the VDC, transmission and suspension
setup switches up or down to change the mode
when the engine is running.
R mode
Push up the VDC, transmission and suspension
setup switches for more than 1 second.
SNOW mode and COMF mode
Push down the transmission and suspension
setup switches.
5-22 Starting and driving
VDC, TRANSMISSION AND
SUSPENSION SETUP SWITCHES