Filter
Top Products
Black plate (12,1)
Model "R35-D" EDITED: 2009/ 3/ 11
. Make sure the tire has not slipped on the
wheel causing the assembly to be out of
balance. The reference marks on the tire and
wheel should be aligned. If the reference
marks are not aligned, the tire has slipped on
the wheel. Have the wheels/tires reba-
lanced. Make sure the old reference marks
are erased and new reference marks are
applied to the wheel and tire. When instal-
ling new tires on the wheels, make sure new
reference marks are applied to the wheels
and tires.
. Check for the heat deterioration of the
brakes and parts around the brakes.
. NISSAN recommends that the brakes
should be bled before engaging in perfor-
mance driving and when replacing the brake
fluid. It is recommended that bleeding the
brake be performed when the brake calipers
are hot (about 2128F (1008C)).
. Check the engine, transmission, differential
and under the vehicle for oil and coolant
leaks.
. Before engaging in performance driving, the
clutch clearance may need to be adjusted.
See your GT-R certified NISSAN dealer for
information.
NOTICE
Failure to have the clutch properly
adjusted before performance driving
may cause the transmission oil tem-
perature to increase which may cause
transmission damage.
. Check the steering and suspension system
and other links for loose and/or damaged
parts before and after driving.
GTR-10 GT-R Overview